JapanCert品質保証
最新の99%のカバー率の問題集を提供することができます。

日本語認定

驚くほどにたやすくCompTIAのN10-004認定試験に受かろう

By blog Admin | 投稿日: Thu, 25 Apr 2013 10:37:20 GMT
当面の社会で、競争がますます激しくなっています。もしあなたはずっといまのままで生活し、自分のレベルを高める気はないとしたら、あなたはきっと職場に排除されます。特に現在で驚くほど速いスピードで発展しているIT業種で、絶え間なく新しい知識を勉強し、多くの資格を取らなければならないです。でないと、あなたはきっとこの業種で働くことができないようになります。その中で、CompTIAN10-004認定試験の資格は一つの重要な資格です。

ところが、どうやってこの難しい試験に合格するかまた悩んでいるのでしょうね。心配することはないです。JapanCertはあなたを助けます。

JapanCertはCompTIAN10-004認定試験に便利なサービスを提供するサイトで、従来の試験によってJapanCert が今年のN10-004認定試験を予測してもっとも真実に近い問題集を研究し続けます。

試験番号:N10-004問題集
試験科目:CompTIA 「CompTIA Network+ (2009 Edition) 」
問題数:555

JapanCertのN10-004試験問題集はあなたが自分の目標を達成することを助けられます。JapanCertのN10-004問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の100パーセント真実な解答を提供することを保証します。

問題集の一部を無料でダウンロードしたいのならこちらへ:http://pdf.japancert.com/N10-004.pdf

NO.1 Which of the following authentication solutions also provides AAA and uses TCP.?
A. TACACS+
B. Kerberos
C. RADIUS
D. RAS
Answer: A

NO.2 A network technician is troubleshooting a problem and has just established a plan of action to resolve
the problem. Which of the following is the NEXT step in the troubleshooting methodology?
A. Verify full system functionality and if applicable implement preventative measures.
B. Implement the solution or escalate as necessary.
C. Document findings, actions, and outcomes.
D. Establish a theory of probable cause (e.g. question the obvious).
Answer: B

NO.3 Which of the following is a reason to use dynamic DNS?
A. The host IP address is not listed in the firewall.
B. The host IP address is assigned by DHCP.
C. Static routes cannot be used on the host network.
D. A third-party certificate is being used.
Answer: B

NO.4 Which of the following protocols is commonly used for VoIP technology?
A. Telnet
B. SMTP
C. SIP
D. SNMP
Answer: C

NO.5 A network technician blocks access to ports 25, 110, and 143 on the firewall. Which of the following
application services will be blocked due to this?
A. Email sending and receiving
B. Domain Name Service
C. FTP access to external servers
D. Remote desktop access
Answer: A

NO.6 Which of the following can be configured to restrict specific ports and IP addresses from accessing the
internal network? (Select TWO).
A. Layer 2 switch
B. MAC address filtering
C. ACLs
D. IIS server
E. Port scanner
F. Firewall
Answer: CF

NO.7 Which of the following metrics indentifies the number of connections that is between two devices?
A. Hop count
B. MTU
C. Latency
D. Bandwidth
Answer: A

NO.8 Which of the following ports would have to be allowed through a firewall to allow SNMP traffic to pass
on its default port? (Select TWO).
A. 22
B. 23
C. 143
D. 161
E. 162
F. 8080
Answer: DE

NO.9 hen the use of a smart card, pin number, and pass phrase is required to login to a system, which of the
following types of authentication is being used?
A. Single sign on
B. PKI
C. Two factor authentication
D. Multi-factor authentication
Answer: D

NO.10 Which of the following is the broadcast address for a network defined as 192.168.0.0/24?
A. 192.168.0.255
B. 192.168.0.1
C. 192.168.0.0
D. 192.168.0.253
Answer: A

NO.11 Which of the following layers of the OSI model maps to the Network Interface layer of the TCP stack?
(Select TWO).
A. Physical
B. Session
C. Data Link
D. Network
E. Transport
Answer: AC

NO.12 A company is about to install a second network connection with a new ISP. Which of the following
routing protocols is the BEST choice?
A. IS-IS
B. BGP
C. OSPF
D. RIP
Answer: B

NO.13 The protocols that use a three way handshake to transfer information can be found within which layer of
the OSI model?
A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 5
Answer: C

NO.14 The network technician is troubleshooting a network issue by implementing a new security device. After
installing and configuring the device, which of the following steps should the technician take NEXT?
A. Verify full system functionality.
B. Identify the main problem and question the user.
C. Document their findings, actions, and outcomes.
D. Escalate the issue to upper management.
Answer: A

NO.15 Which of the following ports is the default telnet port?
A. 20
B. 21
C. 22
D. 23
Answer: D

NO.16 A network technician is attempting to map a FQDN to an internal server at the address of 10.0.0.15
without NAT/PAT. Which of the following is the reason this will ultimately not work?
A. This is a private address which cannot be seen by external users.
B. The address does not have the appropriate subnet mask assigned.
C. This is a public address which can only be seen by internal users.
D. This is a private address which can only be seen by external users.
Answer: A

NO.17 A network technician, working with a large business of 500 employees, decides to configure a server
to handle IP addressing. Which of the following would BEST allow for this setup?
A. Address routing protocol
B. Port mirroring
C. Static addresses
D. DHCP addresses
Answer: D

NO.18 A user is unable to access the company website on a laptop. A network technician verifies that the user
can access other Internet pages. According to network troubleshooting methodology, which of the
following steps should be taken NEXT?
A. Remotely connect to the user's laptop and review the network configuration settings.
B. Ping the web server from inside the network to ensure it is still up and running.
C. Check to make sure the company's website is accessible from the Internet.
D. Ensure the Ethernet cable is securely plugged into the user's laptop.
Answer: C

NO.19 A bridge handles frames at which of the following layers of the OSI model?
A. Network
B. Session
C. Transport
D. Data Link
Answer: D

NO.20 Which of the following would be used to test out the security of a specific network by allowing it to
receive security attacks?
A. Honeynet
B. Honeypot
C. Vulnerability scanner
D. Network based IDS
Answer: A
投稿日: 2013/4/25 10:37:20  |  カテゴリー: CompTIA  |  タグ: N10-004問題集
Copyright © 2024. 日本語認定 All rights reserved.