Symantecの認定試験は最近ますます人気があるようになっています。IT認定試験は様々あります。どの試験を受験したことがありますか。たとえば250-315認定試験などです。これらは全部大切な試験です。どちらを受験したいですか。ここで言いたいのは250-315試験です。この試験を受けたいなら、JapanCertの250-315問題集はあなたが楽に試験に合格するのを助けられます。
あなたはJapanCertが提供したSymantecの250-315認定試験の問題集だけ利用して合格することが問題になりません。ほかの人を超えて業界の中で最大の昇進の機会を得ます。もしあなたはJapanCertの商品がショッピング車に入れて24のインターネットオンライン顧客サービスを提供いたします。問題があったら気軽にお問いください、
今競争の激しいIT業界で地位を固めたいですが、Symantec 250-315認証試験に合格しなければなりません。IT業界ではさらに強くなるために強い専門知識が必要です。Symantec 250-315認証試験に合格することが簡単ではなくて、Symantec 250-315証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
試験科目:「Administration of Symantec Endpoint Protection 12.1」
最近更新時間:2014-06-09
問題と解答:310
JapanCertのSymantecの250-315試験トレーニング資料はあなたに時間とエネルギーを節約させます。あなたが何ヶ月でやる必要があることを我々はやってさしあげましたから。あなたがするべきことは、JapanCertのSymantecの250-315試験トレーニング資料に受かるのです。あなた自身のために、証明書をもらいます。JapanCert はあなたに必要とした知識と経験を提供して、Symantecの250-315試験の目標を作ってあげました。JapanCertを利用したら、試験に合格しないことは絶対ないです。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/250-315.html
NO.1 Use vxdg to split the snapshot volume away from s_data, into a separate
disk group.
A. 4,2,5,3,1
B. 5,4,1,2,3
C. 4,5,2,1,3
D.
5,2,4,1,3
Answer:
C
Symantec費用 250-315問題 250-315合格点 250-315書籍
4.
The vxprint command output for volume vol07 indicates that it has three
plexes.
How will you determine which plexes are used for data?
A. Note the
lengths. Data plexes are all the same length.
B. Note the STATE field.
Non-data plexes will be indicated by the valuE.LOG.
C. Note the STATE field.
Data plexes will be indicated by the valuE.MIRROR.
D. Note the RECORD TYPE
field. Data plexes are designated with PL.
Answer:
B
Symantecふりーく 250-315費用 250-315フリーク 250-315難易度
5.
Catastrophic hardware failure has occurred on a single Symantec Endpoint
Protection
Manager (SEPM) in an environment with two SEPMs.
What is the
quickest way an administrator can restore the environment to its original
state?
A. build a new site and configure replication with the still
functioning SEPM
B. install a new SEPM into the existing site
C. clone the
still functioning SEPM and change the server.properties file
D. reinstall the
entire SEPM environment
Answer: B
Symantec
vue 250-315問題 250-315攻略 250-315合格率 250-315赤本 250-315合格率
NO.2 Where in
the Symantec Endpoint Protection (SEP) management console will a
SEP
administrator find the option to allow all users to enable and disable
the client firewall?
A. Client User Interface Control Settings
B. Overview
in Firewall Policy
C. Settings in Intrusion Prevention Policy
D. System
Lockdown in Group Policy
Answer:
A
Symantec勉強法 250-315虎の巻 250-315講座 250-315通信
NO.3
You are working on Veritas Volume Manager. You need to create volume layout from
multiple
regions of one or more disks, if there is not enough space available
for entire volume on a single
region of a disk. You want to ensure that the
volume that you create provides the flexibility to
extend the volume to
another disk.
What should you do?
A. Use striped volume
B. Use mirrored
volume
C. Use concatenated volume
D. Use RAID-5 volume
E. Use
mirrored-stripe volume
Answer:
C
Symantec難易度 250-315内容 250-315ふりーく 250-315過去
NO.4
When the system is configured to boot a volume from the root system, you get an
error
"VxVM vxconfigd ERROR V-5-1-1049 System boot disk does not have a valid
rootvol plex".
How will you resolve this error?
A. Reboot the
system.
B. Stop and restart the vxconfigd daemon on the node indicated.
C.
Try to boot from one of the named disks using the associated boot command that
is listed in the
message.
D. Check other error messages appearing on the
console and take the actions suggested in the
descriptions of those
messages.
Answer:
C
Symantec独学 250-315参考書 250-315問題集 250-315書籍 250-315関節 250-315
NO.5
You move a set of files from a VxFS file system to another file system. When the
files are
moved, the extent attributes are not moved along with the files and
are lost during the migration.
What could be a possible cause for this
problem?
A. The target file system is not a VxFS type file system.
B.
There is a variation in the block size of source and target VxFS file
system.
C. The target VxFS file system does not have enough free space to
accommodate the extent
attributes.
D. The target VxFS file system uses
mixed block size.
Answer:
A
Symantec費用 250-315 250-315書籍 250-315攻略
14.
On your Storage Foundation 5.0 server, a mirror volume is no longer needed. You
need to
disassociate and remove a mirror named, vol01-02 from the disk group
so that you can free up disk
space.
How will you accomplish this?
A.
Use the vxassist command with the remove mirror option.
B. Use the vxedit
command with the rm vol01-02 option.
C. Use the vxplex command with the rm
dis vol01-02 option.
D. Use the vxplex command with the dis vol01-02
option.
Answer:
C
Symantec参考書 250-315認定 250-315参考書
15.
The datavol volume is in the datadg disk group. A VxFS file system is mounted on
the datavol
volume. You need to increase the length of a datavol volume
because it is not large enough for the
amount of data to be stored on
it.
Which statement is correct for this situation?
A. You cannot resize a
volume by using VEA. You must use the command line to perform this task.
B.
When you resize the volume using VEA, the file system is also resized by
default.
C. You can resize the volume using VEA, but the file system cannot
be resized using VEA.
D. You can use VEA and vxassist command to resize the
volume.
Answer: D
Symantec虎の巻 250-315 250-315 250-315関節 250-315認定試験 250-315会場
NO.6
After installing Veritas Volume Manager for your large number of volumes, you
will configure
the volumes as per your requirement. But you find the
performance is very slow. You need to
reconfigure the volumes to achieve
significant improvement in performance when there are
multiple I/O
streams.
What should you do?
A. Use Mirroring
B. Use Striping
C. Use
Mirroring and Striping
D. Use RAID-5
Answer:
A
Symantec種類 250-315認定資格 250-315学習 250-315問題 250-315費用
NO.7
You are working with the Storage Foundation Intelligent Storage Provisioning
feature, to create
a new mirrored volume. To prevent system failure, you want
to ensure that you are able to perform
a recovery of mirrored volumes in
minimum response time.
What should you do?
A. Create a Dirty Region
Log.
B. Create a Data Change Map log.
C. Create a RAID-5 log.
D. Create
a Snap object log.
Answer:
A
Symantec試験 250-315学習 250-315通信
NO.8
What does the ACTIVE plex state indicate?
A. The data in the plex is not
synchronized with the data in the CLEAN plexes.
B. The plex does not
participate in any I/O when plex is offline, so the contents of plex
become
outdated if the volume is actively written.
C. The plex state does
not define which plex has the active data, and which plex does not have
the
active data.
D. The volume is currently started, and the volume is
able to perform I/O.
Answer:
D
Symantecスクール 250-315攻略 250-315攻略 250-315練習問題
JapanCertは最新のMSC-235問題集と高品質のP2090-080問題と回答を提供します。JapanCertの000-274 VCEテストエンジンと74-344試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のMB6-871 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。