JapanCert品質保証
最新の99%のカバー率の問題集を提供することができます。

日本語認定

評判が高いJuniper JN0-696認証試験の参考書

By blog Admin | 投稿日: Mon, 25 Nov 2013 11:25:40 GMT
JuniperのJN0-696認定試験に受かりたいのなら、適切なトレーニングツールを選択する必要があります。JuniperのJN0-696認定試験に関する研究資料が重要な一部です。我々JapanCertはJuniperのJN0-696認定試験に対する効果的な資料を提供できます。JapanCertのIT専門家は全員が実力と豊富な経験を持っているのですから、彼らが研究した材料は実際の試験問題と殆ど同じです。JapanCertは特別に受験生に便宜を提供するためのサイトで、受験生が首尾よく試験に合格することを助けられます。

JapanCert JuniperのJN0-696試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。インターネットで時勢に遅れないJN0-696勉強資料を提供するというサイトがあるかもしれませんが、JapanCertはあなたに高品質かつ最新のJuniperのJN0-696トレーニング資料を提供するユニークなサイトです。JapanCertの勉強資料とJuniperのJN0-696に関する指導を従えば、初めてJuniperのJN0-696認定試験を受けるあなたでも一回で試験に合格することができます。

試験番号:JN0-696問題集
試験科目:Juniper 「Security Support, Professional (JNCSP-SEC)」
最近更新時間:2013-11-24
問題と解答:36

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/JN0-696.html

NO.1 Users at a branch office report that they cannot reach an internal Web server. The users
connect through a single SRX Series device to reach the Web server. A security policy has been
configured on the device that allows traffic to flow between interfaces in the Trust zone.
What is causing this problem?
A. The interface on the device that connects to the Web server is not in the Trust zone.
B. The IPsec VPN connection between the users and the Web server is down.
C. There is a host inbound traffic configuration problem.
D. There is an antispam configuration problem.
Answer: C

Juniper JN0-696 JN0-696認定試験

NO.2 You want to allow remote users using PCs running Windows 7 to access the network using an
IPsec VPN. You implement a route-based hub-and-spoke VPN; however, users report that they are
not able to access the network.
What is causing this problem?
A. The remote clients do not have proper licensing.
B. Hub-and-spoke VPNs cannot be route-based; they must be policy-based.
C. The remote clients' OS is not supported.
D. Hub-and-spoke VPNs do not support remote client access; a dynamic VPN must be implemented
instead.
Answer: B

Juniper認定資格 JN0-696 JN0-696

NO.3 You are having problems establishing an IPsec tunnel between two SRX Series devices.
What are two explanations for this problem? (Choose two.)
A. proposal mismatch
B. antivirus configuration
C. preshared key mismatch
D. TCP MSS clamping is disabled
Answer: B,D

Juniper JN0-696 JN0-696 JN0-696参考書 JN0-696

NO.4 You notice that the secondary node of a chassis cluster has become disabled.
What caused this behavior?
A. The fxp0 interface on the secondary device failed.
B. The control link between the devices failed.
C. A reth on the secondary device failed.
D. An IPsec tunnel between the two devices failed.
Answer: D

Juniper JN0-696練習問題 JN0-696過去問

NO.5 Two SRX Series devices are having problems establishing an IPsec VPN session. One of the
devices has a firewall filter applied to its gateway interface that rejects UDP traffic.
What would resolve the problem?
A. Disable the IKE Phase 1 part of the session establishment.
B. Disable the IKE Phase 2 part of the session establishment.
C. Change the configuration so that session establishment uses TCP .
D. Edit the firewall filter to allow UDP port 500.
Answer: A

Juniper過去問 JN0-696 JN0-696認定資格

NO.6 Your SRX Series device has the following configuration:
user@host> show security policies
...
Policy: my-policy, State: enabled, Index: 5, Sequence number: 1
Source addresses: any Destination addresses: any
Applications: snmp
Action: reject
From zone: trust, To zone: untrust
...
When traffic matches my-policy, you want the device to silently drop the traffic; however, you
notice that the device is replying with ICMP unreachable messages instead.
What is causing this behavior?
A. the snmp application
B. the reject action
C. the trust zone
D. the untrust zone
Answer: C

Juniper JN0-696認定証 JN0-696練習問題 JN0-696

JapanCertは最新の78-702問題集と高品質の70-687問題と回答を提供します。JapanCertの642-980 VCEテストエンジンとIIA-CCSA試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-303 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/JN0-696.html
投稿日: 2013/11/25 11:25:40  |  カテゴリー: Juniper  |  タグ: JN0-696認証試験
Copyright © 2024. 日本語認定 All rights reserved.