IT認証試験を受かるかどうかが人生の重要な変化に関連することを、受験生はみんなよく知っています。JapanCertは低い価格で高品質の迫真の問題を受験生に提供して差し上げます。JapanCertの製品もコスト効率が良く、一年間の無料更新サービスを提供しています。当社の認定トレーニングの材料は、すぐに入手できます。当社のサイトは答案ダンプのリーディングプロバイダーで、あなたが利用したい最新かつ最正確の試験認定トレーニング材料、いわゆる試験問題と解答を提供しています。
人間ができるというのは、できることを信じるからです。JapanCertは IT職員を助けられるのは職員の能力を証明することができるからです。JapanCertのCiscoの352-001試験はあなたが成功することを助けるトレーニング資料です。Ciscoの352-001認定試験に受かりたいのなら、JapanCert を選んでください。時には、成功と失敗の距離は非常に短いです。前へ何歩進んだら成功できます。あなたはどうしますか。前へ進みたくないですか。JapanCertは成功の扉ですから、 JapanCertを利用してください。
Ciscoの400-101の認定試験に合格すれば、就職機会が多くなります。JapanCertはCiscoの400-101の認定試験の受験生にとっても適合するサイトで、受験生に試験に関する情報を提供するだけでなく、試験の問題と解答をはっきり解説いたします。
試験番号：400-101
試験教材試験科目：「CCIE Routing and Switching Written Exam v5.0」
最近更新時間：2015-06-29
問題と解答：650
JapanCertの352-001試験参考書は他の352-001試験に関連するする参考書よりずっと良いです。これは試験の一発合格を保証できる問題集ですから。この問題集の高い合格率が多くの受験生たちに証明されたのです。JapanCertの352-001問題集は成功へのショートカットです。この問題集を利用したら、あなたは試験に準備する時間を節約することができるだけでなく、試験で楽に高い点数を取ることもできます。
JapanCertは初めて試験を受けるあなたが一回で試験に合格して、認証資格を取ることを保証します。JapanCertが提供して差し上げたのは高品質のCiscoの400-101模擬問題集で、あなたがステップバイステップで試験に準備する手順を指導しています。JapanCertのCiscoの400-101試験問題集は絶対あなたに成功をもたらすことを保証します。JapanCertのCiscoの400-101認定試験に準備するために色々な方法がありますが、
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/400-101.html
NO.1 What is a reason to use DHCPv6 on a network that uses SLAAC?
A. To
get a record of the IPs that are used by the clients
B. To push DNS and other
information to the clients
C. No reason, because there is no need for DHCPv6
when using SLAAC
D. Because DHCPv6 can be used only in stateful mode with
SLAAC to record the IPs of the clients
E. Because DHCPv6 can be used only in
stateless mode with SLAAC to record the IPs of the clients
F. Because DHCPv6
is required to use first-hop security features on the switches
Answer:
B
Cisco 400-101 400-101試験感想 400-101
Explanation:
SLAAC is by
far the easiest way to configure IPv6 addresses, simply because you don't have
to
configure any IPv6 address. With SLAAC, a host uses the IPv6 Neighbor
Discovery Protocol (NDP) to
determine its IP address and default routers.
Using SLAAC, a host requests and listens for Router
Advertisements (RA)
messages, and then taking the prefix that is advertised to form a unique
address
that can be used on the network. For this to work, the prefix that is
advertised must advertise a prefix
length of 64 bits (i.e., /64). But the
most significant of Stateless Address Autoconfiguration (SLAAC) is
it
provided no mechanism for configuring DNS resolver information.Therefore SLACC
can be used
along with DHCPv6 (Stateless) to push DNS and other information
to the clients.
NO.2 Refer to the exhibit.
What is the meaning of the
asterisk (*) in the output?
A. PIM neighbor 10.1.5.6 is the RPF neighbor for
the group 232.1.1.1 for the shared tree.
B. PIM neighbor 10.1.5.6 is the one
that is seen as the RPF neighbor when performing the command
show ip rpf
10.1.4.7.
C. PIM neighbor 10.1.5.6 is the winner of an assert
mechanism.
D. The RPF neighbor 10.1.5.6 is invalid.
Answer:
C
Cisco目的 400-101 400-101
vue 400-101対応 400-101ファンデーション 400-101無料更新
Explanation:
show ip
mroute Field Descriptions Field Description
RPF neighbor or RPF nbr IP
address of the upstream router to the source. Tunneling indicates that
this
router is sending data to the RP encapsulated in register packets. The
hexadecimal number in
parentheses indicates to which RP it is registering.
Each bit indicates a different RP if multiple RPs per
group are used. If an
asterisk (*) appears after the IP address in this field, the RPF neighbor has
been
learned through an assert.
Reference.
http://www.cisco.com/c/en/us/td/docs/ios/12_2/ipmulti/command/reference/fiprmc_r/1rfmult3.ht
ml
NO.3
Which type of OSPF packet is an OSPF link state update packet?
A. type
1
B. type 2
C. type 3
D. type 4
E. type 5
Answer:
D
Cisco問題集 400-101合格率 400-101 400-101出題範囲
Explanation:
Link
State Update packets are OSPF packet type 4. These packets implement the
flooding of link state
advertisements. Each Link State Update packet carries
a collection of link state advertisements one
hop further from its origin.
Several link state advertisements may be included in a single
packet.
Reference. http://www.freesoft.org/CIE/RFC/1583/107.htm
NO.4
Which flag in a configuration BPDU instructs all switches to shorten their
bridge table aging
process from the default 300 seconds to the current
forward delay value?
A. topology change bit
B. topology change
acknowledgment bit
C. priority bit
D. max-age bit
Answer:
A
Cisco赤本 400-101前提条件 400-101 400-101虎の巻
Explanation:
The
Root Bridge continues to set the Topology Change flag (TCN bit) in all
Configuration BPDUs that it
sends out for a total of Forward Delay + Max Age
seconds (default = 35 (20+15) seconds). This flag
instructs all bridges to
shorten their MAC address table (Bridge table) aging process from the
default
value of 300 seconds to the current Forward Delay value of the bridge
(default=15 seconds). The TCA
flag is set by the upstream bridge to tell the
downstream bridges to stop sending TCN BPDUs. The TC
flag is set in
configuration BPDU by the Root Bridge to shorten the bridge table age-out period
from
default 300 seconds to Forward Delay seconds.
NO.5 What is the
purpose of Route Target Constraint?
A. to avoid using route reflectors in
MPLS VPN networks
B. to avoid using multiple route distinguishers per VPN in
MPLS VPN networks
C. to be able to implement VPLS with BGP signaling
D. to
avoid sending unnecessary BGP VPNv4 or VPNv6 updates to the PE router
E. to
avoid BGP having to perform route refreshes
Answer:
D
Cisco日本語 400-101 400-101受験期 400-101テスト
Explanation:
Some
service providers have a very large number of routing updates being sent from
RRs to PEs,
using considerable resources. A PE does not need routing updates
for VRFs that are not on the
PE; therefore, the PE determines that many
routing updates it receives are "unwanted." The PE
can filter out the
unwanted updates using Route Target
Constraint.
Reference.
http://www.cisco.com/c/en/us/td/docs/ios/ios_xe/iproute_bgp/configuration/guide/2_xe/irg_xe_bo
ok
/irg_rt_filter_xe.html.
NO.6
Which three options are sources from which a SPAN session can copy traffic?
(Choose three.)
A. ports
B. EtherChannels
C. VLANs
D. subnets
E.
primary IP addresses
F. secondary IP addresses
Answer:
A,B,C
Cisco参考書勉強 400-101独学 400-101 400-101変更
Explanation:
The
interfaces from which traffic can be monitored are called SPAN sources. Sources
designate the
traffic to monitor and whether to copy ingress, egress, or both
directions of traffic. SPAN sources
include the following:
Ethernet
ports
Port channels
The inband interface to the control plane CPU-You can
monitor the inband interface only from the
default VDC. Inband traffic from
all VDCs is monitored.
VLANs-When a VLAN is specified as a SPAN source, all
supported interfaces in the VLAN are
SPAN sources.
Remote SPAN (RSPAN)
VLANs
Fabric port channels connected to the Cisco Nexus 2000 Series Fabric
Extender
Satellite ports and host interface port channels on the Cisco Nexus
2000 Series Fabric
NO.7 Refer to the exhibit.
Assuming that the peer
is configured correctly and the interface is up, how many neighbors will
be
seen in the EIGRPv6 neighbor table on this IPv6-only router?
A. one
neighbor, which will use a local router-id of 6010. AB8. . /64
B. one
neighbor, which will use a local router-id of 6020. AB8. . /64
C. none,
because EIGRPv6 only supports authenticated peers
D. none, because of the
mismatch of timers
E. none, because there is no EIGRP router ID
configured
Answer:
E
Cisco日記 400-101日本語講座 400-101研修 400-101試験感想 400-101 400-101
Explanation:
Configuring
EIGRP for IPv6 has some restrictions; they are listed below:
Reference.
http://www.cisco.com/c/en/us/support/docs/ip/enhanced-interior-gateway-routingprotocol-
eigrp/113267-eigrp-ipv6-00.html
NO.8
Which statement about the BGP originator ID is true?
A. The route reflector
always sets the originator ID to its own router ID.
B. The route reflector
sets the originator ID to the router ID of the route reflector client that
injects
the route into the AS.
C. The route reflector client that injects
the route into the AS sets the originator ID to its own router
ID.
D. The
originator ID is set to match the cluster ID.
Answer:
B
Cisco対策 400-101ファンデーション 400-101試験感想 400-101学習指導
Explanation:
An
RR reflecting the route received from a RR-Client adds:
Reference.
https://sites.google.com/site/amitsciscozone/home/bgp/bgp-route-reflectors