JapanCertのCiscoの642-813試験トレーニング資料を利用すれば、認定試験に合格するのは簡単になります。うちのCiscoの642-813試験トレーニング資料は豊富な経験を持っている専門家が長年の研究を通じて開発されたものです。JapanCertの学習教材は君の初めての試しでCiscoの642-813認定試験に合格するのに助けます。

Ciscoの640-722日本語の認定試験は当面いろいろな認証試験で最も価値がある試験の一つです。最近の数十年間で、コンピュータ科学の教育は世界各地の数多くの注目を得られています。Ciscoの640-722日本語の認定試験はIT情報技術領域の欠くことができない一部ですから、IT領域の人々はこの試験認証に合格することを通じて自分自身の知識を増加して、他の分野で突破します。JapanCertのCiscoの640-722日本語認定試験の問題と解答はそういう人たちのニーズを答えるために研究した成果です。この試験に合格することがたやすいことではないですから、適切なショートカットを選択するのは成功することの必要です。JapanCertはあなたの成功を助けるために存在しているのですから、JapanCertを選ぶということは成功を選ぶのことと等しいです。JapanCertが提供した問題と解答はIT領域のエリートたちが研究と実践を通じて開発されて、十年間過ぎのIT認証経験を持っています。

JapanCertのIT専門家たちは受験生の皆さんのニーズを満たすように彼らの豊富な知識と経験を活かして試験トレーニング資料の品質をずっと高めています。受験生の皆さんが一回でCiscoの642-813試験に合格することを保証します。JapanCertの製品を購入したら、あなたはいつでも最新かつ最正確な試験情報を得ることができます。JapanCertの資料のカバー率が高くて、受験生に便宜を与えられます。それに、問題集の合格率が１００パーセントに達するのですから、あなたは安心に試験を受けることができます。

試験番号：642-813 再テスト
試験科目：「Implementing Cisco IP Switched Networks」
最近更新時間：2015-06-24
問題と解答：196

>>642-813 再テスト

試験番号：640-722日本語 オンライン試験
試験科目：「Implementing Cisco Unified Wireless Networking Essentials (640-722日本語版)」
最近更新時間：2015-06-24
問題と解答：228

>>640-722日本語 オンライン試験

受験生の皆様にもっと多くの助けを差し上げるために、JapanCert のCiscoの642-813トレーニング資料はインターネットであなたの緊張を解消することができます。642-813 勉強資料は公式Ciscoの642-813試験トレーニング授業 、Ciscoの642-813 自習ガイド、Ciscoの642-813 の試験と実践やCiscoの642-813オンラインテストなどに含まれています。JapanCert がデザインしたCiscoの642-813模擬トレーニングパッケージはあなたが楽に試験に合格することを助けます。JapanCertの勉強資料を手に入れたら、指示に従えば 642-813認定試験に受かることはたやすくなります。

進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くJapanCertのCiscoの642-813試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。

JapanCertが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

JapanCertは正確な選択を与えて、君の悩みを減らして、もし早くてCisco 642-813認証をとりたければ、早くてJapanCertをショッピングカートに入れましょう。あなたにとても良い指導を確保できて、試験に合格するのを助けって、JapanCertからすぐにあなたの通行証をとります。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/642-813.html

NO.1 Refer to the exhibit.
Which statement about the private VLAN configuration is true?
A. Only VLAN 503 will be the community PVLAN, because multiple community PVLANs are not
allowed.
B. Users of VLANs 501 and 503 will be able to communicate.
C. VLAN 502 is a secondary VLAN.
D. VLAN 502 will be a standalone VLAN, because it is not associated with any other VLANs.
Answer: C

Cisco資格取得 642-813初心者 642-813購入 642-813短期
Explanation:
VLAN 502 has been configured as private-vlan community. So it is a secondary PVLAN

NO.2 By itself, what does the command aaa new-model enable?
A. It globally enables AAA on the switch, with default lists applied to the VTYs.
B. Nothing; you must also specify which protocol (RADIUS or TACACS) will be used for AAA.
C. It enables AAA on all dot1x ports.
D. Nothing; you must also specify where (console, TTY, VTY, dot1x) AAA is being applied.
Answer: A

Cisco資格 642-813 642-813受験方法 642-813試験教材 642-813資格取得講座
Explanation:
aaa new-model enable the AAA access control model. Access control is the way you control who is
allowed access to the network server and what services they are allowed to use once they have
access. Authentication, authorization, and accounting (AAA) network security services provide the
primary framework through which you set up access control on your router or access server.
Reference:
http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/scfaaa.html

NO.3 Refer to the exhibit.
From the configuration shown, what can be determined?
A. The sticky addresses are only those manually configured MAC addresses enabled with the sticky
keyword.
B. The remaining secure MAC addresses are learned dynamically, converted to sticky secure MAC
addresses, and added to the running configuration.
C. A voice VLAN is configured in this example, so port security should be set for a maximum of 2.
D. A security violation restricts the number of addresses to a maximum of 10 addresses per access
VLAN and voice VLAN. The port is shut down if more than 10 devices per VLAN attempt to access the
port.
Answer: B

Cisco模擬 642-813受験生 642-813学習 642-813学習教材 642-813オンライン試験
Explanation:
By enabling sticky port security, you can configure an interface to convert the dynamic MAC
addresses to sticky secure MAC addresses and to add them to the running configuration. You might
want to do this if you do not expect the user to move to another port, and you want to avoid
statically configuring a MAC address on every port. To enable sticky port security, enter the
switchport port-security mac-address sticky command. When you enter this command, the interface
converts all the dynamic secure MAC addresses, including those that were dynamically learned
before sticky learning was enabled, to sticky secure MAC addresses. The sticky secure MAC addresses
do not automatically become part of the configuration file, which is the startup configuration used
each time the switch restarts. If you save the running config file to the configuration file, the interface
does not need to relearn these addresses when the switch restarts. If you do not save the
configuration, they are lost.
Reference:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/53SG/configuration/port_sec.ht
m l#wp1047668

NO.4 Refer to the exhibit.
Which two statements are true? (Choose two.)
A. Interface gigabitethernet 0/1 has been configured as Layer 3 ports.
B. Interface gigabitethernet 0/1 does not appear in the show vlan output because switchport is
enabled.
C. Interface gigabitethernet 0/1 does not appear in the show vlan output because it is configured as a
trunk interface.
D. VLAN2 has been configured as the native VLAN for the 802.1q trunk on interface gigabitethernet
0/1.
E. Traffic on VLAN 1 that is sent out gigabitethernet 0/1 will have an 802.1q header applied.
F. Traffic on VLAN 2 that is sent out gigabitethernet 0/1 will have an 802.1q header applied.
Answer: C,F

Cisco試験対策 642-813対策 642-813受験期 642-813サンプル
Explanation:
From the output of show interface gigabitethernet 0/1 switchport command we can see this port is
currently configured as trunked port (Operational Mode: trunk) and uses 802.1q encapsulation. So
surely the "show vlan" command will not list this port -> C is correct.
Also from the first output we learned the native VLAN is VLAN 1 (Trunking Native Mode VLAN:1) so
only traffic from this VLAN is sent untagged -> traffic sent from VLAN 2 out this port will have an
802.1q header applied -> F is correct.

NO.5 Which MST configuration statement is correct?
A. MST configurations can be propagated to other switches using VTP.
B. After MST is configured on a Switch, PVST+ operations will also be enabled by default.
C. MST configurations must be manually configured on each switch within the MST region.
D. MST configurations only need to be manually configured on the Root Bridge.
E. MST configurations are entered using the VLAN Database mode on Cisco Catalyst switches.
Answer: A

Ciscoテスト問題集 642-813サンプル問題集 642-813 642-813資格取得講座
Explanation:
In addition to propagating VTP information, version 3 can propagate Multiple Spanning Tree (MST)
protocol database information. A separate instance of the VTP protocol runs for each application that
uses VTP.
Reference:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/122_52_se/con
figuration/guide/3560scg/swvtp.html

NO.6 What is needed to verify that a newly implemented security solution is performing as expected
?
A. a detailed physical and logical topology
B. a cost analysis of the implemented solution
C. detailed logs from the AAA and SNMP servers
D. results from audit testing of the implemented solution
Answer: D

Cisco 642-813受験期 642-813 642-813ソートキー 642-813科目対策
Explanation:
Recommended by Cisco verification plan for designing a security solution includes verification of an
implemented security solution requires results from audit testing of the implemented solution.
Reference:
http://www.ccnpguide.com/design-documentation/

NO.7 In the MAC address 0000.0c07.ac03, what does the "03" represent?
A. HSRP router number 3
B. Type of encapsulation
C. HSRP group number
D. VRRP group number
E. GLBP group number
Answer: C

Cisco対応受験 642-813 642-813虎の巻 642-813対策
Explanation:
Each router keeps a unique MAC address for its interface. This MAC address is always associated with
the unique IP address configured on the interface. For the virtual router address, HSRP defines a
special MAC address of the form 0000.0c07.acxx, where xx represents the HSRP group
number as a two-digit hex value. For example, HSRP Group 1 appears as 0000.0c07.ac01, HSRP
Group 16 appears as 0000.0c07.ac10.
Reference: Cisco Hot Standby Router Protocol (HSRP)
(http://tools.ietf.org/html/rfc2281#page-13)

NO.8 What are three results of issuing the switchport host command? (Choose three.)
A. disables EtherChannel
B. enables port security
C. disables Cisco Discovery Protocol
D. enables PortFast
E. disables trunking
F. enables loopguard
Answer: A,D,E

Cisco 642-813 642-813合格点 642-813独学書籍 642-813攻略 642-813取得
Explanation:
The switchport host command disables channeling, enables spanning-tree portfast and enables the
switchport nonegotiate command to turn off DTP negotiation packets.
Reference:
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfd6.
shtml#hostfix