VMwareのVCP510PSE認定試験に受かる勉強サイトを探しているのなら、JapanCertはあなたにとって一番良い選択です。JapanCertがあなたに差し上げられるのはIT業種の最先端のスキルを習得したこととVMwareのVCP510PSE認定試験に合格したことです。この試験は本当に難しいことがみんなは良く知っていますが、試験に受かるのは不可能ではないです。自分に向いている勉強ツールを選べますから。JapanCert のVMwareのVCP510PSE試験問題集と解答はあなたにとって一番良い選択です。JapanCertのトレーニング資料は完全だけでなく、カバー率も高くて、高度なシミュレーションを持っているのです。これはさまざまな試験の実践の検査に合格したもので、VMwareのVCP510PSE認定試験に合格したかったら、JapanCertを選ぶのは絶対正しいことです。
君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにJapanCertを選択してください。JapanCertはまた一年間に無料なサービスを更新いたします。
JapanCertはVMwareのVCP510PSE試験に関する完全な資料を唯一のサービスを提供するサイトでございます。JapanCertが提供した問題集を利用してVMwareのVCP510PSE試験は全然問題にならなくて、高い点数で合格できます。VMware VCP510PSE試験の合格のために、JapanCertを選択してください。
この人材が多い社会で、人々はずっと自分の能力を高めていますが、世界で最先端のIT専門家に対する需要が継続的に拡大しています。ですから、VMwareのVCP510PSE認定試験に受かりたい人が多くなります。しかし、試験に受かるのは容易なことではないです。実は良いトレーニング資料を選んだら試験に合格することは不可能ではないです。JapanCertが提供したVMwareのVCP510PSE試験トレーニング資料はあなたが試験に合格することを助けられます。JapanCertのトレーニング資料は大勢な受験生に証明されたもので、国際的に他のサイトをずっと先んじています。VMwareのVCP510PSE認定試験に合格したいのなら、JapanCertが提供したVMwareのVCP510PSEトレーニング資料をショッピングカートに入れましょう。
試験番号：VCP510PSE 認定資格試験科目：「VMware Certified Professional 5 - Data Center Virtualization PSE」
最近更新時間：2014-10-30
問題と解答：318
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/VCP510PSE.html
NO.1 Users are experiencing performance issues when updating their database hosted on a virtual
machine. The administrator determines that disk I/O is high across one of the HBAs on the ESXi host
containing the virtual machine.
What is the action will most likely correct the issue without significantly impacting other users or
datastores?
A. Manually configure the disk multipathing policy to Round Robin for the datastore
B. Migrate the virtual machine to an NFS datastore using Storage vMotion
C. Use Storage vMotion to migrate the virtual machine to a new VMFS5 datastore
D. Map additional LUNs to the ESXi host and extend the datastores
Answer: A
VMware VCP510PSEフリーク VCP510PSE VCP510PSEクラムメディア
NO.2 An administrator selects the Profile Compliance tab of a vSphere cluster, then selects Check
Compliance Now. Which features requirements are not checked by this?
A. vMotion
B. Fault Tolerance
C. DRS
D. Host Profiles
Answer: D
VMware VCP510PSE過去問 VCP510PSE認定 VCP510PSE教本 VCP510PSE科目
10. An administrator is editing the IP allocation policy for a vApp. Which three options are
available? (Choose three.)
A. Automatic
B. Roaming
C. Transient
D. DHCP
E. Fixed
Answer: C,D,E
VMware学校 VCP510PSE講座 VCP510PSE番号 VCP510PSEガイド VCP510PSE問題集
11. An administrator views the Fault Tolerance pane of the Summary tab of a virtual machine
and finds that the current status is Not Protected.
What are two vSphere Fault Tolerance states that would cause the virtual machine to not be
protected? (Choose two.)
A. Stopped - Fault Tolerance has been stopped on the secondary virtual machine.
B. Need Secondary VM - The primary virtual machine is running without a secondary virtual
machine and is not protected
C. Need Primary VM - The secondary virtual machine is running, and a new primary virtual machine
cannot be generated.
D. Disabled - Fault Tolerance is disabled.
Answer: B,D
VMwareガイド VCP510PSE VCP510PSE問題 VCP510PSE過去 VCP510PSE
12. Which VMware solution uses the security of a vSphere implementation and provides
linked-clone technology to virtual desktops?
A. VMware ACE
B. VMware View
C. VMware Workstation
D. VMware ThinApp
Answer: B
VMware過去 VCP510PSE問題集 VCP510PSE教材 VCP510PSE問題集 VCP510PSE教材 VCP510PSE PDF
Explanation:
Reference: http://www.vmware.com/files/pdf/VMware-View-4-Composer-DS-EN.pdf (page 1, last
paragraph)
13. An administrator is working to update the hosts and virtual machines in a vSphere 5.x
deployment using Update Manager Baselines.
Other than host patches, which three items require a separate procedure or process to update?
(Choose three.)
A. Operating system patches
B. Virtual Appliance updates
C. Virtual Machine Virtual Hardware upgrades
D. VMware Tools on machines without VMware Tools already installed
E. Application patches within the virtual machine
Answer: A,D,E
VMware VCP510PSE内容 VCP510PSEクラムメディア VCP510PSE
14. An administrator is working to implement Storage Profiles in their environment.
Which two ways can storage capabilities be generated? (Choose two.)
A. They are generated by Datastore Clusters as LUNs are added to the cluster.
B. They are automatically determined by the Storage Profile when it is created.
C. They can be retrieved from the array through the VMware APIs for Storage Awareness (VASA).
D. They can be manually generated by the administrator.
Answer: C,D
VMware教育 VCP510PSE教科書 VCP510PSE練習問題
Explanation:
Understanding Storage Capabilities
A storage capability outlines the quality of service that a storage system can deliver.
It is a guarantee that the storage system can provide a specific set of characteristics for capacity,
performance, availability, redundancy, and so on.
If a storage system uses Storage APIs - Storage Awareness, it informs vCenter Server that it can
guarantee a specific set of storage features by presenting them as a storage capability. vCenter
Server recognizes the capability and adds it to the list of storage capabilities in the Manage Storage
Capabilities dialog box. Such storage capabilities are system-defined. vCenter Server assigns the
system-defined storage capability to each datastore that you create from that storage system.
NOTE:
Because multiple system capabilities for a datastore are not supported, a datastore that spans
several extents assumes the system capability of only one of its extents.
You can create user-defined storage capabilities and associate them with datastores.
You should associate the same user-defined capability with datastores that guarantee the same
level of storage capabilities. You can associate a user-defined capability with a datastore that already
has a system-defined capability. A datastore can have only one system-defined and only one
userdefined capability at a time.
15. An administrator has created a virtual machine that will be accessed from a public kiosk.
Management has requested that the virtual machine be reset to a known state once a week or on
demand if requested.
Which method is the simplest way to meet this requirement?
A. Configure the storage array to be vSphere aware and script routine array snapshot restores of the
datastore.
B. Implement a 3rd party imaging server and PXE boot the virtual machine off a static image.
C. Set the VMDKs of the virtual machine to be Independent-Nonpersistent and schedule restarts of
the virtual machine.
D. Create Nonpersistent disks for the virtual machine and set the guest OS to reboot once a week.
Answer: C
VMware問題集 VCP510PSE受験記 VCP510PSE模擬 VCP510PSE受験記
16. Which three Storage I/O Control conditions might trigger the Non-VI workload detected on
the datastore alarm? (Choose three.)
A. The datastore is connected to an ESX/ESXi 4.0 host that does not support Storage I/O Control.
B. The datastore is on an array that is performing system tasks such as replication.
C. The datastore is utilizing active/passive multipathing or NMP (Native Multi-Pathing).
D. The datastore is storing virtual machines with one or more snapshots.
E. The datastore is connected to an ESX/ESXi 4.0 host that is not managed by vCenter.
Answer: A,B,E
VMware割引 VCP510PSEフリーク VCP510PSE勉強法 VCP510PSE vue
Explanation:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externa
lId=1020651
http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsphere.troubleshooting.doc_50/GUID38F
95285-DB4F-462F-AFD7-0F4D812B085F.html
17. An administrator has deployed vCenter Data Recovery and wants the largest possible
de-duplication store. Which three storage options can be used? (Choose three.)
A. Two CIFS shares
B. Two RDMs on a FCP array
C. One NFS mount on the ESXi host and one RDMs on an iSCSI array
D. One CIFS share and one FCP RDM
E. Two NFS mounts on the ESXi host
Answer: B,C,E
VMware難易度 VCP510PSE VCP510PSE会場
18. Which two conditions must exist on all hosts in the cluster if Enhanced vMotion
Compatibility (EVC) is used? (Choose two.)
A. The cluster must be enabled for DRS.
B. All hosts in the cluster must be running ESX/ESXi 3.5 Update 2 or later.
C. All hosts in the cluster must have hardware virtualization support enabled.
D. The cluster must be enabled for HA.
Answer: B,C
VMware勉強法 VCP510PSE資格 VCP510PSE認証試験 VCP510PSE独学 VCP510PSE方法 VCP510PSE
19. What are three true statements about quiescing virtual machine snapshots? (Choose three.)
A. vSphere snapshot quiescing only occurs on Windows guest OSes.
B. The quiescing operation is automatic with any snapshot.
C. The quiescing operation varies by guest OS.
D. Quiescing should occur before array-based snapshots to ensure consistency.
E. VMware Tools is required for quiescing to be successful.
Answer: C,D,E
VMware VCP510PSE虎の巻 VCP510PSE受験記 VCP510PSEふりーく
20. An administrator has just finished deploying a vApp for a web service. What three options
are available to the administrator for IP allocation within the vApp? (Choose three.)
A. Transient
B. Fixed
C. DHCP
D. Bridged
E. NAT
Answer: A,B,C
VMware VCP510PSE VCP510PSE PDF
21. An administrator takes a vSphere snapshot of a virtual machine and applies an OS update.
After confirming the update the administrator cannot enable Fault Tolerance on the virtual machine
and suspects there are snapshots that have not been consolidated.
Which two operations can the administrator perform to verify consolidation is needed? (Choose
two.)
A. Expose the Needs Consolidation column in the virtual machines tab of the host.
B. Browse the datastore containing the vmdk files and look for files with the "-delta.vmdk"
extension.
C. Expose the Needs Consolidation column in the virtual machine summary tab.
D. Select and run the vSphere Cluster HealthCheck from the right-click menu of the cluster object.
Answer: A,B
VMware VCP510PSE学校 VCP510PSE関節
22. An administrator is enabling Enhanced vMotion Compatibility (EVC) in a DRS cluster. The
administrator wants only hosts with the newest Intel processors added to the cluster.
Which setting satisfies this requirement?
A. The baseline with the most CPUs listed
B. The baseline with the fewest CPUs listed
C. Any baseline that contains Future Intel processors
D. Create a new baseline and add only the latest processor family
Answer: D
VMware VCP510PSE練習問題 VCP510PSE
Reference:
http://www.virtualizationadmin.com/articles-tutorials/vmware-esx-and-vspherearticles/vmotion-dr
s-high-availability/enhanced-vmotion-compatibility-primer.html (8th para)
23. Which two conditions will prevent a virtual machine from being successfully migrated using
Storage vMotion? (Choose two.)
A. The virtual machine has an RDM.
B. The virtual machine has Fault Tolerance enabled.
C. The virtual machine is running on a vSphere 5.x Standard host.
D. The virtual machine has a disk stored on an NFS datastore.
Answer: B,C
VMware方法 VCP510PSEテスト VCP510PSE合格点
24. An administrator is using Update Manager 5.x to update virtual appliances in a vSphere
environment. The environment is using the vCenter Server Virtual Appliance (vCSA).
What would cause the remediation to fail?
A. Updating of the appliance can only be done if the vCenter Server Virtual Appliance (vCSA) has
been put into Maintenance Mode.
B. Remediation must be configured on the Appliance Administration page before use.
C. Remediation of the vCenter Server Virtual Appliance (vCSA) with Update Manager is not
supported.
D. Remediation requires the hosts to be connected to vCenter using an IPv4 address.
Answer: C
VMware教本 VCP510PSE PDF VCP510PSE VCP510PSE取得 VCP510PSE認証試験
25. ACME Junkmail Incorporated has been utilizing templates in their environment. They are
running a 10-node ESXi 5.x Cluster and DRS has not been configured. Several virtual machines have
been deployed from this template and successfully powered on, but a newly deployed virtual
machine will not power on. There appear to be adequate CPU and Memory resources available on
the host.
Which three things can be done to allow more virtual machines to be deployed into the cluster from
this template? (Choose three.)
A. Select a different datastore for the virtual machine
B. Move the swap file to a different location
C. Deploy the virtual machine to a different host using the same datastore
D. Enable DRS on the cluster to balance the virtual machine load out across hosts
E. Increase the virtual machine memory reservation
Answer: A,B,E
VMwareクラムメディア VCP510PSE練習 VCP510PSE VCP510PSE PDF
Explanation:
If you make reservations for your virtual machine's that are equal to the amount of RAM assigned to
them, swapping and page sharing does not occur.
You can over commit pretty heavily if you are comfortable with poorer performance.
If you do not set reservations, ESX host creates a .vswp file equal to the difference between the
amount of physical memory assigned to the virtual machine and the reservation it has.
By default, memory reservations are set to 0. If you have a virtual machine with 2GB of memory
without a reservation, it creates a 2GB .vswp file when it is powered on.
The virtual machine starts using the .vswp file if the server is out of physical RAM. If you set a 1GB
reservation, it creates a 1GB .vswp file.
The .vswp files are what allows for memory overcommitment.
NO.3 What are three valid objects to place in a vApp? (Choose three.)
A. Folders
B. Hosts
C. Resource pools
D. vApps
E. Virtual machines
Answer: C,D,E
VMware方法 VCP510PSE問題集 VCP510PSE VCP510PSE学校
NO.4 Which two conditions prevent the application of a host profile to an ESXi 5.x host? (Choose
two.)
A. The host has multiple profiles attached.
B. The host has not been placed into maintenance mode.
C. The host is running virtual machines.
D. The host is an ESXi host.
Answer: B,C
VMware PDF VCP510PSE VCP510PSE VCP510PSE一発合格
NO.5 An administrator notices that when a virtual machine is placed into a resource pool, a warning
indicates that the virtual machine will receive a very large percentage of the total shares for
memory. Which action can be taken to resolve this problem?
A. Increase the memory resource allocation to the resource pool.
B. Increase the share value for the resource pool.
C. Change the shares setting from custom to high, medium, or low for the virtual machine.
D. Decrease the memory allocation for the virtual machine.
Answer: C
VMware種類 VCP510PSE VCP510PSE一発合格
Explanation:
The Memory Resources panel lets you allocate memory resources for a virtual machine and specify
reservations, limits, and shares. Symbolic values Low, Normal, High, and Custom are compared to
the sum of all shares of all virtual machines on the server and, on an ESX host, the service console.
By decreasing the memory share of a particular system, it receives less memory out of the total
available memory.
NO.6 An administrator has recently upgraded their Update Manager infrastructure to vSphere 5.x.
Several hosts and virtual machines have not been upgraded yet.
Which vSphere component when upgraded will have the least impact to the existing environment?
A. Virtual Machine Hardware
B. ESX Hosts
C. VMFS datastores
D. VMware Tools
Answer: D
VMwareフリーク VCP510PSE過去 VCP510PSE認定 VCP510PSEガイド VCP510PSE
NO.7 An ESXi 5.x host displays a warning icon in the vSphere console and its summary page lists a
configuration issue "SSH for the host has been enabled." What are two ways to clear this warning?
(Choose two.)
A. Using the Security Profile pane of the Configuration tab in the vSphere Client
B. Using the Direct Console User Interface (DCUI)
C. Using the Advanced Settings pane of the Configuration tab in the vSphere Client
D. Using the Networking pane of the Configuration tab in the vSphere Client
Answer: A,B
VMware資格 VCP510PSE練習問題 VCP510PSE取得 VCP510PSE教育
NO.8 An administrator is troubleshooting an ESXi 5.x host and needs to export diagnostic
information. The host is currently managed by a vCenter Server instance.
Which two ways can the information be gathered using the vSphere Client? (Choose two.)
A. Select Home. Under Administration, click System Logs and click the Export System Logs button.
Select the affected ESXi host. Select Select All. Select a location and click Finish.
B. In the vSphere Client, select the affected ESXi host. Right-click the host and select Export
Diagnostic Data. Select a location and click OK.
C. Log in to the ESXi host locally, Select Export System Logs.
D. In the vSphere Client, select the affected ESXi host. Select File, Export and Export System Logs.
Select Select All. Select a location and click Finish.
Answer: A,D
VMwareガイド VCP510PSEガイド VCP510PSE関節
JapanCertは最新のVCP-510問題集と高品質の74-353問題と回答を提供します。JapanCertのICYB VCEテストエンジンとICGB試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC2040-416 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。