どんな業界で自分に良い昇進機会があると希望する職人がとても多いと思って、IT業界にも例外ではありません。ITの専門者はOracleの1z0-485認定試験があなたの願望を助けって実現できるのがよく分かります。JapanCertはあなたの夢に実現させるサイトでございます。

IT業種のOracleの1z0-485認定試験に合格したいのなら、JapanCert Oracleの1z0-485試験トレーニング問題集を選ぶのは必要なことです。Oracleの1z0-485認定試験に受かったら、あなたの仕事はより良い保証を得て、将来のキャリアで、少なくともIT領域であなたの技能と知識は国際的に認知され、受け入れられるです。これも多くの人々がOracleの1z0-485認定試験を選ぶ理由の一つです。その理由でこの試験はますます重視されるになります。JapanCert Oracleの1z0-485試験トレーニング資料はあなたが上記の念願を実現することを助けられるのです。JapanCert Oracleの1z0-485試験トレーニング資料は豊富な経験を持っているIT専門家が研究したもので、問題と解答が緊密に結んでいますから、比べるものがないです。高い価格のトレーニング授業を受けることはなくて、JapanCert Oracleの1z0-485試験トレーニング資料をショッピングカートに入れる限り、我々はあなたが気楽に試験に合格することを助けられます。

受験生の皆様にもっと多くの助けを差し上げるために、JapanCert のOracleの1z0-485トレーニング資料はインターネットであなたの緊張を解消することができます。1z0-485 勉強資料は公式Oracleの1z0-485試験トレーニング授業 、Oracleの1z0-485 自習ガイド、Oracleの1z0-485 の試験と実践やOracleの1z0-485オンラインテストなどに含まれています。JapanCert がデザインしたOracleの1z0-485模擬トレーニングパッケージはあなたが楽に試験に合格することを助けます。JapanCertの勉強資料を手に入れたら、指示に従えば 1z0-485認定試験に受かることはたやすくなります。

JapanCertを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。JapanCertはOracle 1z0-485認証試験を助けって通じての最良の選択で、１００％のOracle 1z0-485認証試験合格率のはJapanCert最高の保証でございます。君が選んだのはJapanCert、成功を選択したのに等しいです。

1z0-485認定試験の準備をするために、JapanCert の専門家たちは彼らの豊富な知識と実践を生かして特別なトレーニング資料を研究しました。JapanCert のOracleの1z0-485問題集はあなたが楽に試験に受かることを助けます。JapanCert のOracleの1z0-485練習テストは1z0-485試験問題と解答、 1z0-485 問題集、1z0-485 書籍や1z0-485勉強ガイドに含まれています。

JapanCertの専門家チームが君の需要を満たすために自分の経験と知識を利用してOracleの1z0-485認定試験対策模擬テスト問題集が研究しました。模擬テスト問題集と真実の試験問題がよく似ています。一目でわかる最新の出題傾向でわかりやすい解説と充実の補充問題があります。

試験番号：1z0-485問題集
試験科目：Oracle 「Exadata Database Machine Models X3-2 and X3-8 Implementation Essentials」
最近更新時間：2014-03-05
問題と解答：71

IT業界で仕事している皆さんはIT認定試験の資格の重要性をよく知っていているでしょう。IT認定試験には多くの種類があります。現在最も人気がある試験もいろいろあります。例えば1z0-485認定試験などです。その中の試験、どちらを受験しましたか。もし一つの認証資格を持っていないなら、IT認定試験を申し込んで試験の資格を取得する必要があります。試験を受ける予定があれば、急いでJapanCertへ来て必要な情報を見つけましょう。JapanCertはあなたが1z0-485認定試験に合格する保障ですから。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/1z0-485.html

NO.1 Exadata Database Machine offers an Intelligent Platform Management Interface for the
various components in the Exadata product. Which option is true?
A. IPMI can be used to remotely start and stop servers.
B. IPMI can be used to remotely log in to the operating system.
C. IPMI commands can be executed by using SNMP traps.
D. IPMI settings can be secured by backing up the Oracle Linux installation on the storage system.
Answer: A

Oracle 1z0-485過去問 1z0-485練習問題 1z0-485参考書 1z0-485
Explanation:
IPMI - short for Intelligent Platform Management Interface - is an interface standard that allows
remote management of a server from another using standardized interface. The servers in the
Exadata Database Machine follow that. It's not an Exadata command but rather a general Linux one.
To power on a cell or database server, issue this from another server: # ipmitool -H prolcel01-ilom
-U root chassis power on
To stop a server, use the shutdown command. To stop immediately and keep it down, i.e. not reboot,
execute:# shutdown -h -y now

NO.2 Which two statements are true about enabling write-back flash cache?
A. When enabling write-back flash cache in a non rolling manner, it is important to ensure that
asmdeactivatonoutcome is set to YES and asmModestatus is set to ONLINE for all grid disks.
B. Before using write-back flash cache, you need to verify the minimum required versions.
C. Before write back-flash cache is enabled, you need to drop the Flash Cache first.
D. The setting flashCacheMode should be set to writeback by updating cellinit.ora and restarting
cellsrv.
E. When enabling write-back flash cache in a rolling manner, dcli should be used to inactivate the
grid disks on all cells first.
Answer: B,C

Oracle 1z0-485参考書 1z0-485過去問 1z0-485 1z0-485
Explanation:
B: Exadata storage version 11.2.3.2.1 is the minimum version required to use this write back flash
cache option.
C: Steps for Enabling Write back flash cache:
First of all, you don't need the stop CRS or database (This is ROLLING method) ,you can do it cell
by cell.
*drop flashcache
*Be sure asmdeactivationoutcome is YES is before disabling grid disk

NO.3 A customer has three databases named CC. FIN, and DW. The CC database is for their
CallCenter. Even a slight decrease in the response time of the database would mean more people
"on hold" in their data center. The orders received through the CallCenter are stored in the Finance
(FIN) database. Both databases, CC and FIN, serve as sources for the Data Warehouse (DW)
database. All databases use the same Automatic Storage Management (ASM) diskgroup and
therefore, the same physical disks on Exadata storage. The customer wants to dynamically control
the resources that are available for the CallCenter database because this has direct impact on their
operations?
Which option should be implemented?
A. DBRM on the CC database
B. DBRM on all the databases
C. IORM, because DBRM cannot be changed for an existing session
D. IORM and DBRM
Answer: B

Oracle問題集 1z0-485参考書 1z0-485 1z0-485認証試験
Explanation:
Using the Database Resource Manager, you can: Distribute available processing resources by
allocating percentages of CPU time to different users and applications. In a data warehouse, a
higher percentage may be given to ROLAP (relational on-line analytical processing) applications than
to batch jobs.

NO.4 Consider the following software changes that are performed manually on a Linux server:
1.Changes for Linux kernel firewall configuration
2.Changes for custom performance monitoring tools
3.Changes for security scan tools
4.Changes for Linux system performance optimization
Which of the software changes listed are permitted on Exadata Storage Servers?
A. 1, 2, 3, and 4
B. only 3 '
C. none
D. only 2
E. only 1 and 2
F. only 2 and 3
Answer: E

Oracle 1z0-485 1z0-485過去問 1z0-485
Explanation:
1. The Storage Server Patch is responsible for keeping our cell nodes always up-todate, fixing
possible problems, and this patch includes different component patches, like kernel patches,
firmware, operation system, etc... for the Storage Server. Incorrect: 3,4: security scan tools changes
and Linux system performance optimization changes would be on the database server.

NO.5 Consider the following setup:
User A1 belongs to resource group High on Database A.
User B2 belongs to resource group Low on Database B.
User C3 is a user on Database C without any DBRM setup.
DBRM setup:
Database A: Resource group High gets 80% and Low gets 20%.
Database B: Resource group High gets 60% and Low gets 40%.
IORM setup:
Database A: Share=20, limit=5
Database B: Share=30, limit=10
Database C: 5 shares
Total number of shares in the IORM setup = 100
What percent of I/O will each database user theoretically be using when the Exadata storage unit
I/O throughout is used 100% and no other databases but A, B, and C are running?
A. Al = 36%, B2=18%, and C3=9%
B. Al = 33%, B2=33%, and C3=33%
C. AI = 10%, B2=5%, and C3=20%
D. Al = 8%, B2=12%, and C3=5%
E. Al = 5%, B2=10%, and C3=85%
Answer: E

Oracle問題集 1z0-485参考書 1z0-485 1z0-485認証試験 1z0-485
Explanation:
IORM setup limits Database A to 5%, and Database B is limited to 10%, while
Database C has not IORM limit.
Not that the resource groups are for CPU allocation.

NO.6 Consider this CellCLI command:
CellCLI> CREATE GRIDDISK ALL HARDDISK PREFIX=data, size=423G;
Which two statements describe what happens when you execute this command?
A. It creates one 423 GB grid disk on the first available cell hard disk.
B. It creates one 423 GB grid disk on each available cell hard disk.
C. It creates grid disks on the outermost 423 GB that is available on each hard disk.
D. It creates grid disks on the innermost 423 GB that is available on each hard disk.
E. It creates an Exadata Smart Flash Cache on all flash drives.
Answer: B,C

Oracle 1z0-485参考書 1z0-485認定試験 1z0-485
Explanation:
* Example: CellCLI> create griddisk all harddisk prefix=temp_dg, size=570G This command will
create 12 Griddisks, each of 570G in size from the outer (fastest) sectors of the underlying Harddisks.
It fills up the first 2 Celldisks entirely, because they have just 570G space free - the rest is already
consumed by the OS partition.
8. You get a Host Unreachable error when you attempt to connect to a server through a network
terminal command line. What are two other ways in which you can connect?
A. Use the ILOM Web GUI.
B. Use the dcli command at the root prompt on a database node.
C. Attach a terminal device to the back panel of the server with a serial cable.
D. Connect by using SQL *Plus.
E. Log in as root on the database node using the Net1 IP address.
Answer: A,C

Oracle練習問題 1z0-485認定資格 1z0-485認証試験
Explanation:
In addition to gaining shell access via SSH to manage your Exadata servers, you can also access them
from the Integrated Lights Out Management (ILOM) console or KVM console.
and should typically not require modifications unless you have changed network information inside
your database machine.
Note: A KVM switch (with KVM being an abbreviation for "keyboard, video and mouse") is a
hardware device that allows a user to control multiple computers from one or more[1] keyboard,
video monitor and mouse. Although multiple computers are connected to the KVM, typically a
smaller number of computers can be controlled at any given time
9. Identify three best practices for applying asmdeactivationoutcome es on Exadata Database
Servers and Exadata Storage Servers?
A. Backing up database servers and storage cells is not recommended before performing planned
maintenance.
B. Database server updates can be rolled back using the the "yum downgrade" procedure.
C. Bundle patches do not require testing before being installed on a production system.
D. It is recommended that Exadata systems with Data Guard configured use the "Standby First"
patching approach.
E. Patching should never be interrupted due to a connection drop. It is therefore recommended that
you use VNC or the screen utility.
F. Before patching cells in a rolling manner, you must check asmdeactivationoutcome amModestatus
and make sure that cells on all disks are online and that disks can be deactivated.
Answer: D,E,F

Oracle過去問 1z0-485 1z0-485 1z0-485過去問 1z0-485
10. The mpstat output from OS Watcher shows a database node as being 90% idle on an average.
What would you do to get a full picture of CPU utilization on the entire Exadata RAC cluster?
A. Average the mpstat id1 output from all the nodes.
B. Ask application users if they have noticed a slowdown in screen response.
C. Look for an increase in batch job servicing times.
D. A & B above
Answer: A

Oracle 1z0-485 1z0-485認定試験

NO.7 Which is the best location to point your customer to, for finding the latest Exadata patches?
A. owner's guide
B. Patch database in MyOracle Support
C. MyOracle Support note 888828.1
D. MyOracle Support for database patches, ULN for OS patches, and Sun Support for Server and
InfiniBand patches.
Answer: B

Oracle 1z0-485練習問題 1z0-485問題集 1z0-485過去問 1z0-485 1z0-485認定資格
Explanation:
Before starting, we would like to share and note here two documents from My Oracle Support, aka
metalink. These notes must be the first place that you need to go to review before patching the
Exadata environment.
* (B) Database Machine and Exadata Storage Server 11g Release 2 (11.2) Supported Versions (Doc ID.
888828.1)
-This is for the second and third generation (V2 and X2) for Oracle Exadata, using Sun hardware.
* Database Machine and Exadata Storage Server 11g Release 1 (11.1) Supported Versions (Doc
ID. 835032.1)
* - This is for the first generation (V1) for Oracle Exadata, using HP hardware.

JapanCertは最新のVCAW510問題集と高品質の000-657問題と回答を提供します。JapanCertのBAS-013 VCEテストエンジンとJK0-U11試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHH0-240 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://www.japancert.com/1z0-485.html