IT業種で仕事している皆さんが現在最も受験したい認定試験はIBMの認定試験のようですね。広く認証されている認証試験として、IBMの試験はますます人気があるようになっています。その中で、C2050-241認定試験が最も重要な一つです。この試験の認定資格はあなたが高い技能を身につけていることも証明できます。しかし、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。JapanCertはC2050-241認定試験に合格することを助けてあげますから。

IT領域での主要な問題が質と実用性が欠くということを我々ははっきり知っています。JapanCertのIBMのC2050-241の試験問題と解答はあなたが必要とした一切の試験トレーニング資料を準備して差し上げます。実際の試験のシナリオと一致で、选択問題（多肢選択問題）はあなたが試験を受かるために有効な助けになれます。JapanCertのIBMのC2050-241の試験トレーニング資料は検証した試験資料で、JapanCertの専門的な実践経験に含まれています。

IBMのC2050-241試験に受かることは確かにあなたのキャリアに明るい未来を与えられます。IBMのC2050-241試験に受かったら、あなたの技能を検証できるだけでなく、あなたが専門的な豊富の知識を持っていることも証明します。JapanCertのIBMのC2050-241試験トレーニング資料は実践の検証に合格したソフトで、手に入れたらあなたに最も向いているものを持つようになります。 JapanCertのIBMのC2050-241試験トレーニング資料を購入する前に、無料な試用版を利用することができます。そうしたら資料の高品質を知ることができ、一番良いものを選んだということも分かります。

JapanCertを選択したら、成功が遠くではありません。JapanCertが提供するIBMのC2050-241認証試験問題集が君の試験に合格させます。テストの時に有効なツルが必要でございます。

JapanCertはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がJapanCertの問題集を使うので試験に合格しますた。彼らはJapanCertの問題集が有効なこと確認しました。JapanCertが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

試験番号：C2050-241問題集
試験科目：IBM 「IBM Sterling Order Management V9.2, Solution Design」
最近更新時間：2014-02-06
問題と解答：54

IBMのC2050-241認定試験は業界で広く認証されたIT認定です。世界各地の人々はIBMのC2050-241認定試験が好きです。この認証は自分のキャリアを強化することができ、自分が成功に近づかせますから。IBMのC2050-241試験と言ったら、JapanCert のIBMのC2050-241試験トレーニング資料はずっとほかのサイトを先んじているのは、JapanCert にはIT領域のエリートが組み立てられた強い団体がありますから。その団体はいつでも最新のIBM C2050-241試験トレーニング資料を追跡していて、彼らのプロな心を持って、ずっと試験トレーニング資料の研究に力を尽くしています。

JapanCertの問題集を購入したら、あなたの試験合格率が100%を保証いたします。もし試験に失敗したら、弊社が全額で返金いたします。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/C2050-241.html

NO.1 A business requirement is to charge payment for the exchange order upfront and then refund
the customer when the returned item is received. This requirement should be configured as a:
A. even exchange.
B. regular exchange.
C. advanced exchange.
D. advanced pre-paid exchange.
Answer: D

IBM C2050-241認定資格 C2050-241 C2050-241認定証 C2050-241

NO.2 A customer would like a purchase order (PO) to be "Created", but it should only treat 80% of
future supply as available. This should happen until the PO receives a status update that indicates its
been "Approved", at which point 90% of the future supply can be considered for promising. Future
supply can be considered when scheduling orders but should not be considered when releasing the
pick instructions to the fulfillment center. In order to model this requirement with MINIMAL custom
logic, the solution design must:
A. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Set up the
appropriate safety factor of 80% for supply type "Purchase order placed" and 90% for supply type
"Inbound approved".5. Use Inventory considerations to map the demand type corresponding to
schedule transaction to future supplies.6. Use Inventory considerations to map the demand type
corresponding to release transaction to use only onhand supplies.
B. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Set up the
appropriate safety factor of 80% for demand type "Scheduled" and 90% for demand type
"Released".5. Use Inventory considerations to map the demand type corresponding to schedule
transaction to future supplies.6. Use Inventory considerations to map the demand type
corresponding to release transaction to use only onhand supplies.
C. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Use
Inventory considerations to map the demand type corresponding to schedule transaction to future
supplies.5. Use Inventory considerations to map the demand type corresponding to release
transaction to use only onhand supplies.6. Implement the Supply corrections user exit to only show
80% or 90% of supply as applicable.
D. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Use
Inventory considerations to map the demand type corresponding to schedule transaction to future
supplies.5. Use Inventory considerations to map the demand type corresponding to release
transaction to use only onhand supplies.6. Implement the Availability corrections user exit to only
show 80% or 90% of supply as applicable.
Answer: A

IBM認定資格 C2050-241過去問 C2050-241認定証 C2050-241

NO.3 A retailer's delivery rules do not allow shipping for an open box television (TV) that is more
than 150 miles away. However, they do support moving this TV through a network of stores that are
spread throughout the country, until it reaches a store that supports delivery to the customer. The
retailer needs to configure such a multi-hop transfer of inventory through the supply chain and
provide an accurate promise date to a customer who is over 1000 miles away from the store with
the open box TV. In order to do so, Sterling Order Management considers all the following
configuration settings EXCEPT for:
A. Receiving store calendar.
B. Receipt Processing Time.
C. Delivery resource pool capacity.
D. Transfer relationship across stores.
Answer: C

IBM C2050-241 C2050-241 C2050-241問題集 C2050-241認定試験

NO.4 In the integration between Sterling Order Management V9.2 and WebSphere Commerce,
which of the following actions will a customer service representative be UNABLE to take when
entering orders through the Sterling application?
A. Make manual adjustments in an order.
B. Enter orders for a customer who has no customer ID.
C. Pre-populate customer information from WebSphere Commerce.
D. Tell customers about promotions and discounts applied to the order.
Answer: C

IBM認定資格 C2050-241 C2050-241 C2050-241 C2050-241練習問題 C2050-241

NO.5 Which of the following Sterling Call Center business requirements CANNOT be implemented
using the out of the box application?
A. Monitor orders for FTC compliance.
B. Schedule appointments for delivery items.
C. Initiate returns and refunds to customers immediately, if required.
D. Retrieve a WebSphere Commerce shopping cart from the Sterling Call Center.
Answer: D

IBM C2050-241問題集 C2050-241

NO.6 A business needs to configure a drop ship from a vendor to a customer directly with visibility
into the purchase order (PO) created by the vendor and status updates on the PO. What should be
done to meet this requirement?
A. 1. Model the vendor as a seller and node, where the organization does not have a hierarchical
relation with the seller organization on theorder.2. Do not check "Suppress chained order creation
even if seller requires" setting.3. Run Chained_Order_Create to create the purchase order.PO
getting shipped will result in the corresponding sales order line being shipped.
B. 1. Model the vendor as a seller and node, where the organization has a hierarchical relation with
the seller organization on the order.2. Check the "Suppress chained order creation even if seller
requires" setting.3. Run Chained_Order_Create to create the purchase order.PO getting shipped will
result in the corresponding sales order line being shipped.
C. 1. Model the vendor as a seller and node, where the organization has a hierarchical relation with
the seller organization on the order.2. Check the "Suppress chained order creation even if seller
requires" setting.3. Run Chained_Order_Create to create the PO. Place custom logic on PO
"Shipped" event to update the corresponding sales order status to"Shipped".
D. 1. Model the vendor as a seller and node, where the organization does not have a hierarchical
relation with the seller organization on theorder.2. Implement a listener on the PO pipeline that
updates the sales order pipeline.3. Implement custom logic to stamp the PO's delivery location as
customer's address.PO getting shipped will result in the corresponding sales order line being
shipped.
Answer: A

IBM認証試験 C2050-241練習問題 C2050-241 C2050-241認定証 C2050-241認定資格

NO.7 A customer purchased a DVD player from a store, and later realized that some of the required
features were missing. The customer tries to return the DVD player for a refund, but the sales order
cannot be located in the Sterling application. Which type of return should be created in the Sterling
application?
A. Refund Order
B. Exchange Order
C. Blind Return Order
D. Speed Exchange Order
Answer: C

IBM C2050-241練習問題 C2050-241 C2050-241

JapanCertは最新の642-384問題集と高品質の3I0-012問題と回答を提供します。JapanCertの1Z0-409 VCEテストエンジンと70-414試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-318 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://www.japancert.com/C2050-241.html