JapanCert品質保証
最新の99%のカバー率の問題集を提供することができます。

日本語認定

JN0-332資格認定、JN0-633ソフトウエア

By blog Admin | 投稿日: Fri, 21 Aug 2015 15:06:48 GMT

JapanCertはIT試験問題集を提供するウエブダイトで、ここによく分かります。最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社の資料を使って、100%に合格を保証いたします。

あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、JN0-633認定試験を受験して認証資格を取るのは一つの良い方法です。Juniperの認定試験のJN0-633資格は非常に大切なものですから、Juniperの試験を受ける人もますます多くなっています。

JN0-332試験番号:JN0-332 最新試験
試験科目:「Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC)」
最近更新時間:2015-08-20
問題と解答:490

>> JN0-332 最新試験

JN0-633試験番号:JN0-633 模試エンジン
試験科目:「Security, Professional (JNCIP-SEC) Exam」
最近更新時間:2015-08-20
問題と解答:175

>> JN0-633 模試エンジン

In what ways has your performance improved as a result of the Juniper Networks certification process?
Faster identification and resolution of issues 52%
Better and more complete understanding of networking principles in general 52%
Better and more complete utilization of the full functionality of our Juniper gear 51%
More efficient and effective design of our network 40%
Managers See Improved Team Performance
Managers realized significant performance improvements for teams with Juniper Networks certified members – 80% realizing over 40% improvement in productivity.

“To what extent has the knowledge and experience required to pass the Juniper Networks certification exams improved your team’s overall performance?”

In what ways has your team’s performance improved as a result of the Juniper Networks certification process?
Faster identification and resolution of issues 61%
Better and more complete utilization of the full functionality of our Juniper gear 48%
More efficient and effective design of our network 41%
Better and more complete understanding of networking principles in general 38%
Able to do more with fewer staff 31%

JapanCertのJN0-332問題集は多くの受験生に検証されたものですから、高い成功率を保証できます。もしこの問題集を利用してからやはり試験に不合格になってしまえば、JapanCertは全額で返金することができます。あるいは、無料で試験JN0-332問題集を更新してあげるのを選択することもできます。こんな保障がありますから、心配する必要は全然ないですよ。

JapanCertのJuniperのJN0-633試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。JapanCertの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/JN0-633.html

NO.1 Which AppSecure module provides Quality of Service?
A. AppTrack
B. AppFW
C. AppID
D. AppQoS
Answer: D

Juniper JN0-633フリーク JN0-633 JN0-633最新な問題集

NO.2 Your SRX device is performing NAT to provide an internal resource with a public address. Your
DNS server is on the same network segment as the server. You want your internal hosts to be able to
reach the internal resource using the DNS name of the resource.
How do you accomplish this goal?
A. Implement proxy ARP.
B. Implement NAT-Traversal.
C. Implement NAT hairpinning.
D. Implement persistent NAT.
Answer: A

Juniperふりーく JN0-633過去問題 JN0-633学習指導
Explanation:
Reference :http://www.juniper.net/techpubs/software/junos-security/junos-
security96/junossecurity-swconfig-security/prxy-arp-nat_srx.html

NO.3 Click the Exhibit button.
{primarynode0}[edit security idp idp-policy test-ips-policy]
[email protected]# show
rulebase-ips {
rule r1 {
match {
source-address any;
attacks {
predefined-attack-groups "HTTP - All";
}
}
then {
action {
drop-packet;
}
}
terminal;
}
rule r2 {
match {
source-address 172.16.0.0/12;
attacks {
predefined-attack-groups "FTP - All";
}
then {
action {
no-action;
}
}
}
rule r3 {
match {
source-address 172.16.0.0/12;
attacks {
predefined-attack-groups "TELNET - All";
}
}
then {
action {
no-action;
} } } rule r4 { match { source-address any; attacks { predefined-attack-groups "FTP - All"; } } then {
action { drop-packet; } } } }
A user with IP address 172.301.100 initiates an FTP session to a host with IP address
10.100.1.50 through an SRX Series device and is subject to the IPS policy shown in the exhibit.
If the user tries to execute thecd ~rootcommand, which statement is correct?
A. The FTP command will be denied with the offending packet dropped and the session will be closed
by the SRX device.
B. The FTP command will be denied with the offending packet dropped and the rest of the FTP
session will be inspected by the IPS policy.
C. The FTP command will be allowed to execute and the rest of the FTP session will be ignored by the
IPS policy.
D. The FTP command will be allowed to execute but any other attacks executed during the session
will be inspected.
Answer: D

Juniper受験生 試験番号 JN0-633 JN0-633日本語サンプル

NO.4 Which action will allow an administrator to connect in band to an SRX Series device in
transparent mode over SSH?
A. Use a VLAN interface.
B. Use the loopback interface.
C. Use a logical interface.
D. Use an irb interface.
Answer: D

Juniper最新な問題集 JN0-633講座 JN0-633実際試験

NO.5 Click the Exhibit button.
[email protected]# show interfaces
ge-0/0/0 {
unit 1 {
family bridge {
interface-mode trunk;
vlan-id-list 20;
vlan-rewrite {
translate 2 20;
}
}
}
}
Referring to the exhibit, which two statements are correct regarding VLAN rewrite? (Choose two.)
A. An incoming packet with VLAN tag 20 will be translated to VLAN tag 2.
B. An outgoing packet with VLAN tag 2 will be translated to VLAN tag 20.
C. An incoming packet with VLAN tag 2 will be translated to VLAN tag 20.
D. An outgoing packet with VLAN tag 20 will be translated to VLAN tag 2.
Answer: C

Juniper勉強法学校 JN0-633難易度 JN0-633教科書 JN0-633合格率 JN0-633バージョン

NO.6 What are three techniques to mark DSCP values on an SRX Series device? (Choose three.)
A. IDP attack action-based DSCP rewriters
B. 802.11Q
C. VLAN rewrite
D. ALG-based DSCP rewriters
E. Layer 7 application-based DSCP rewriters.
Answer: A,D,E

Juniper変更 JN0-633 JN0-633学習資料

NO.7 Click the Exhibit button. [edit] [email protected]# run show log debug
Feb3 22:04:31 22:04:31.824294:CID-0:RT:flow_first_policy_search: policy search from
zone host-> zone attacker (Ox0,0xe4089404,0x17)
Feb3 22:04:31 22:04:31.824297:CID-0:RT:Policy lkup: vsys 0 zone(9:host) ->
zone(10:attacker) scope: 0 Feb3 22:04:31 22:04:31.824770:CID-0:RT:5.0.0.25/59028 -> 25.0.0.25/23
proto 6 Feb3 22:04:31 22:04:31.824778:CID-0:RT:Policy lkup: vsys 0 zone(5:Umkmowm) ->
zone(5:Umkmowm) scope: 0 Feb3 22:04:31 22:04:31.824780:CID-0:RT:5.0.0.25/59028 ->
25.0.0.25/23 proto 6 Feb3 22:04:31 22:04:31.824783:CID-0:RT: app 10, timeout 1800s, curr ageout
20s Feb3 22:04:31 22:04:31.824785:CID-0:RT: permitted by policy default-policy-00(2) Feb3 22:04:31
22:04:31.824787:CID-0:RT: packet passed, Permitted by policy.
Feb3 22:04:31 22:04:31.824790:CID-0:RT:flow_first_src_xlate:
nat_src_xlated: False, nat_src_xlate_failed; False
Feb3 22:04:31 22:04:31.824834:CID-0:RT:flow_first_src_xlate: incoming src port is: 38118
Which two statements are true regarding the output shown in the exhibit? (Choose two.)
A. The packet does not match any user-configured security policies.
B. The user has configured a security policy to allow the packet.
C. The log is showing the first path packet flow.
D. The log shows the reverse flow of the session.
Answer: C

Juniper勉強方法 JN0-633アクセスリスト JN0-633 JN0-633合格率

NO.8 Your company has added a connection to a new ISP and you have been asked to send specific
traffic to the new ISP.
You have decided to implement filter-based forwarding. You have configured new routing instances
with type forwarding.
You must direct traffic into each instance.Which step would accomplish this goal?
A. Add a firewall filter to the ingress interface that specifies the intended routing instance as the
action.
B. Create a routing policy to direct the traffic to the required forwarding instances.
C. Configure the ingress and egress interfaces in each forwarding instance.
D. Create a static default route for each ISP in inet.0, each pointing to a different forwarding instance.
Answer: A

Juniper JN0-633ディレクトリ同期 JN0-633 JN0-633
Explanation:
Reference :http://kb.juniper.net/InfoCenter/index?page=content&id=KB17223

投稿日: 2015/8/21 15:06:48  |  カテゴリー: Juniper  |  タグ: JN0-633試験問題集JN0-332問題集JN0-633認定試験JN0-332最新試験
Copyright © 2021. 日本語認定 All rights reserved.