NO.1 Your network contains an Active Directory domain named contoso.com. The domain contains
two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as
nodes in a failover cluster named Cluster1.
You add two additional nodes in Cluster1.
You have a folder named Folder1 on Server1 that hosts Application data. Folder1 is a folder target in
a Distributed File System (DFS) namespace.
You need to provide highly available access to Folder1. The solution must support DFS Replication to
Folder1.
What should you configure?
A. Affinity-None
B. Affinity-Single
C. The cluster quorum settings
D. The failover settings
E. A file server for general use
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. The Scale-Out File Server
Answer: E

Microsoft虎の巻 70-412専門知識 70-412必要性
Explanation:
File Server for general use Note: You can deploy and configure a clustered file server by using either
of the following methods:
*File Server for general use This is the continuation of the clustered file server that has been
supported in Windows Server since the introduction of Failover Clustering. This type of clustered file
server, and therefore all the shares associated with the clustered file server, is online on one node at
a time. This is sometimes referred to as active-passive or dual-active. File shares associated with this
type of clustered file server are called clustered file shares. This is the recommended file server type
when deploying information worker scenarios.
*Scale-Out File Server for application data This clustered file server feature was introduced in
Windows Server 2012, and it lets you store server application data, such as Hyper-V virtual machine
files, on file shares, and obtain a similar level of reliability, availability, manageability, and high
performance that you would expect from a storage area network. All file shares are simultaneously
online on all nodes. File shares associated with this type of clustered file server are called scale-out
file shares. This is sometimes referred to as active-active. This is the recommended file server type
when deploying either Hyper-V over Server Message Block (SMB) or Microsoft SQL Server over SMB.
Scale-Out File Server for Application Data Overview

NO.2 Your company recently deployed a new Active Directory forest named contoso.com. The
forest contains two Active Directory sites named Site1 and Site2. The first domain controller in the
forest runs Windows Server 2012 R2.
You need to force the replication of the SYSVOL folder from Site1 to Site2.
Which tool should you use?
A. Active Directory Sites and Services
B. DFS Management
C. Repadmin
D. Dfsrdiag
Answer: D

Microsoft 70-412受験 70-412 70-412一発合格
Explanation:
In Windows Server 2012 R2, Windows Server 2008 R2, or Windows Server 2008, you can force
replication immediately by using DFS Management, as described in Edit Replication Schedules. You
can also force replication by using the Dfsrdiag SyncNow command. You can force polling by using the
Dfsrdiag PollAD command.
Reference: DFS Replication: Frequently Asked Questions (FAQ)
http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072

NO.3 Your network contains two Active Directory forests named contoso.com and adatum.com. All
of the domain controllers in both of the forests run Windows Server 2012 R2. The adatum.com
domain contains a file server named Servers.
Adatum.com has a one-way forest trust to contoso.com.
A contoso.com user name User10 attempts to access a shared folder on Servers and receives the
error message shown in the exhibit. (Click the Exhibit button.)
You verify that the Authenticated Users group has Read permissions to the Data folder.
You need to ensure that User10 can read the contents of the Data folder on Server5 in the
adatum.com domain.
What should you do?
A. Grant the Other Organization group Read permissions to the Data folder.
B. Modify the list of logon workstations of the contoso\User10 user account.
C. Enable the Netlogon Service (NP-In) firewall rule on Server5.
D. Modify the permissions on the Server5 computer object in Active Directory.
Answer: D

Microsoftファンデーション 70-412キャッシュ 70-412コンポーネント 70-412日本語 70-412試験教材
Explanation:
*To resolve the issue, I had to open up AD Users and Computers --> enable Advanced Features -->
Select the Computer Object --> Properties --> Security --> Add the Group I want to allow access to the
computer (in this case, DomainA\Domain users) and allow "Allowed to Authenticate". Once I did that,
everything worked:
*For users in a trusted Windows Server 2008 or Windows Server 2003 domain or forest to be able to
access resources in a trusting Windows Server 2008 or Windows Server 2003 domain or forest where
the trust authentication setting has been set to selective authentication, each user must be explicitly
granted the Allowed to Authenticate permission on the security descriptor of the computer objects
(resource computers) that reside in the trusting domain or forest.
Reference: Grant the Allowed to Authenticate Permission on Computers in the Trusting Domain or
Forest
http://technet.microsoft.com/en-us/library/cc816733(v=ws.10).aspx

NO.4 Your network contains two servers named Server1 and Server2 that run Windows Server 2012
R2. Server1 and Server2 have the Hyper-V server role installed. Server1 and Server2 are configured as
Hyper-V replicas of each other.
Server2 hosts a virtual machine named VM5. VM5 is replicated to Server1.
You need to verify whether the replica of VM5 on Server1 is functional. The solution must ensure that
VM5 remains accessible to clients.
What should you do from Hyper-V Manager?
A. On Server1, execute a Planned Failover.
B. On Server1, execute a Test Failover.
C. On Server2, execute a Planned Failover.
D. On Server2, execute a Test Failover.
Answer: B

Microsoft変更 70-412 70-412
Explanation:
Test Failover (TFO) is an operation initiated on your replica virtual machine which allows you to test
the sanity of the virtualized workload without interrupting your production workload or ongoing
replication.
TFO is performed on the replica virtual machine by right-clicking on the VM and choosing the Test
Failover operation (either from the Hyper-V Manager or from the Failover Clustering Manager).
Reference: Types of failover operations in Hyper-V Replica - Part I - Test Failover

NO.5 Your network contains an Active Directory domain named contoso.com. The domain contains
a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role
installed.
An administrator installs the IP Address Management (IPAM) Server feature on a server named
Server2. The administrator configures IPAM by using Group Policy based provisioning and starts
server discovery.
You plan to create Group Policies for IPAM provisioning.
You need to identify which Group Policy object (GPO) name prefix must be used for IPAM Group
Policies.
What should you do on Server2?
A. From Server Manager, review the IPAM overview.
B. Run the ipamgc.exe tool.
C. From Task Scheduler, review the IPAM tasks.
D. Run the Get-IpamConfiguration cmdlet.
Answer: D

Microsoft技術試験 70-412 70-412解答例 70-412暗記カード 70-412認定
Explanation:
Example:
http://i.imgur.com/YcHLXhr.jpg

NO.6 You have a datacenter that contains six servers. Each server has the Hyper-V server role
installed and runs Windows Server 2012 R2. The servers are configured as shown in the following
table.
Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1.
You need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1.
To which server and by which method should you move VM1?
A. To Host3 by using a storage migration
B. To Host6 by using a storage migration
C. To Host2 by using a live migration
D. To Host1 by using a quick migration
Answer: A

Microsoft 70-412 70-412割引 70-412合格率 70-412信頼度
Explanation:
With Hyper-V live migration, you can move running VMs from one Hyper-V physical host to
another without any disruption of service or perceived downtime.
Incorrect:
Not A, not C: The migration of a virtual machine between physical computers is only
supported on computers that have the same processor steppings or are from the same
vendor. Therefore you cannot move a virtual machine from a Hyper-V host on an Intel-
based server to a Hyper-V Host on an AMD-based server.
Not D: Quick Migration saves, moves and restores VMs, which results in some downtime.
Ref: Hyper-V Migration Guide
http://technet.microsoft.com/en-us/library/ee849855(v=WS.10).aspx
Ref: Virtual Machine Storage Migration Overview http://technet.microsoft.com/en-
us/library/hh831656.aspx
Ref: Windows Server 2008 R2 & Microsoft Hyper-V Server 2008 R2 - Hyper-V Live Migration Overview
& Architecture (http://www.microsoft.com/enus/download/details.aspx?id=12601)

NO.7 Your network contains two servers named HV1 and HV2. Both servers run Windows Server
2012 R2 and have the Hyper-V server role installed.
HV1 hosts 25 virtual machines. The virtual machine configuration files and the virtual hard disks are
stored in D:\VM.
You shut down all of the virtual machines on HV1.
You copy D:\VM to D:\VM on HV2.
You need to start all of the virtual machines on HV2. You want to achieve this goal by using the
minimum amount of administrative effort.
What should you do?
A. Run the Import-VMInitialReplication cmdlet.
B. From HV1, export all virtual machines to D:\VM. Copy D:\VM to D:\VM on HV2 and overwrite the
existing files. On HV2, run the Import Virtual Machine wizard.
C. From HV1, export all virtual machines to D:\VM. Copy D:\VM to D:\VM on HV2 and overwrite the
existing files. On HV2, run the New Virtual Machine wizard.
D. Run the Import-VM cmdlet.
Answer: D

Microsoft段階 70-412 70-412 70-412段階 70-412
Explanation:
Import-VM
Imports a virtual machine from a file.
Example
Imports the virtual machine from its configuration file. The virtual machine is registered in-place, so
its files are not copied.
Windows PowerShell
PS C:\> Import-VM -Path 'D:\Test\VirtualMachines\5AE40946-3A98-428E-8C83-081A3C6BD18C.XML'
Reference: Import-VM

NO.8 Your network contains an Active Directory domain named contoso.com.
The domain contains two member servers named Server1 and Server2.
All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed.
The servers are configured as nodes in a failover cluster named Cluster1.
Cluster1 hosts an Application named App1.
You need to ensure that Server2 handles all of the client requests to the cluster for App1. The
solution must ensure that if Server2 fails, Server1 becomes the active node for App1.
What should you configure?
A. Affinity-None
B. Affinity-Single
C. The cluster quorum settings
D. The failover settings
E. A file server for general use
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. the Scale-Out File Server
Answer: J

Microsoftバージョン 70-412虎の巻 70-412試験情報 70-412試験対策
Explanation:
The preferred owner in a 2 server cluster will always be the active node unless it is down.
Reference: Preferred Owners in a Cluster
http://blogs.msdn.com/b/clustering/archive/2008/10/14/9000092.aspx

JapanCertのMicrosoftの70-412試験トレーニング資料は全てのIT認定試験に通用します。JapanCertのMicrosoftの70-412試験トレーニング資料は豊富な経験を持っている専門家が長年の研究を通じて開発されたものです。その権威性は言うまでもありません。もしMicrosoftの70-412問題集は問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。

070-412認定試験の準備を完了したのですか。試験を目前に控え、自信満々と受験することができますか。もしまだ試験に合格する自信を持っていないなら、ここで最高の試験参考書を推奨します。ただ短時間の勉強で試験に合格できる最新の070-412問題集が登場しました。この素晴らしい問題集はJapanCertによって提供されます。

JapanCertのトレーニング資料はあなたが試験の準備をしている知識をテストできて、一定の時間にあなたのパフォーマンスを評価することもできますから、あなたの成績と弱点を指示して、弱い点を改善して差し上げます。JapanCertのMicrosoftの70-412試験トレーニング資料はさまざまなコアロジックのテーマを紹介します。そうしたら知識を習得するだけでなく、色々な技術と科目も理解できます。我々のトレーニング資料は実践の検証に合格したもので、資料の問題集が全面的で、価格が手頃ということを保証します。

Configuring Advanced Windows Server 2012 Services

Configure and manage high availability (15–20%)

Configure file and storage solutions (15–20%)

Implement business continuity and disaster recovery (15–20%)

Configure Network Services (15–20%)

Configure the Active Directory infrastructure (15–20%)

Configure Identity and Access Solutions (15–20%)

Instructor-led training

Exam prep videos

Self-paced training

Practice test

Books

Who should take this exam?

This exam is part three of a series of three exams that test the skills and knowledge necessary to administer a Windows Server 2012 infrastructure in an enterprise environment. Passing this exam validates a candidate’s ability to perform the advanced configuring tasks required to deploy, manage, and maintain a Windows Server 2012 infrastructure, such as fault tolerance, certificate services, and identity federation. Passing this exam along with the other two exams confirms that a candidate has the skills and knowledge necessary for implementing, managing, maintaining, and provisioning services and infrastructure in a Windows Server 2012 environment.

試験番号：70-412 トレーニング費用
試験科目：「Configuring Advanced Windows Server 2012 Services」
最近更新時間：2015-06-08
問題と解答：218

>>詳しい紹介はこちら

試験番号：070-412 認定資格
試験科目：「Configuring Advanced Windows Server 2012 Services」
最近更新時間：2015-06-08
問題と解答：218

>>詳しい紹介はこちら

Microsoftの70-412のオンラインサービスのスタディガイドを買いたかったら、JapanCertを買うのを薦めています。JapanCertは同じ作用がある多くのサイトでリーダーとしているサイトで、最も良い品質と最新のトレーニング資料を提供しています。弊社が提供したすべての勉強資料と他のトレーニング資料はコスト効率の良い製品で、サイトが一年間の無料更新サービスを提供します。ですから、弊社のトレーニング製品はあなたが試験に合格することを助けにならなかったら、全額で返金することを保証します。

JapanCertはMicrosoftの70-412認定試験に受かりたい各受験生に明確かつ顕著なソリューションを提供しました。当社はMicrosoftの70-412認定試験の詳しい問題と解答を提供します。当社のIT専門家が最も経験と資格があるプロな人々で、我々が提供したテストの問題と解答は実際の認定試験と殆ど同じです。これは本当に素晴らしいことです。それにもっと大切なのは、JapanCertのサイトは世界的で70-412試験トレーニングによっての試験合格率が一番高いです。

IT職員としてのあなたは昇進したいのですか。プロなIT技術専門家になりたいのですか。速くMicrosoftの70-412認定試験を申し込みましょう。この認証がどんなに重要するかあなたもよく知っています。試験に合格できないなんて心配しないで、あなたの能力を疑わないでください。Microsoftの70-412認定試験を受けたいのなら、試験の準備に関する全ての質問がJapanCertは解決して差し上げます。JapanCertはIT認証に対するプロなサイトです。JapanCertがそばのいてあげたら、全ての難問が解決できます。JapanCertに助けられた受験生は数え切れないです。JapanCertをクロックしたら、１００パーセントの成功を差し上げます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/70-412.html